WristOx2® Model 3150 with Bluetooth® Low Energy

Availability: In Stock
Wrist-Worn Pulse Oximeter

Featuring Nonin PureSAT® SpO2 technology, the WristOx2 3150 with Bluetooth® Low Energy (BLE) delivers fast, accurate oxygen saturation and pulse rate readings in challenging conditions, including low perfusion and motion. The WristOx2 3150 with BLE is compatible with a wide range of Nonin PureLight® sensors and provides continuous, reliable SpO2 monitoring and data recording. Applications include overnight oximetry studies at home, in the hospital, and in sleep labs.

Category:

Oxygen Saturation Display Range: 0% to 100% SpO2
Pulse Rate Display Range: 18 to 321 beats per minute (BPM)
Displays:
Numeric: 3-digit LCD
Pulse Strength: Pulse Strength Bar Graph

Accuracy – Sensors: Declared accuracy data for compatible sensors can be found in Nonin’s Sensor Accuracy document.
Measurement Wavelengths and Output Power**:
Red: 660 nanometers @ 0.8 mW maximum average
Infrared: 910 nanometers @ 1.2 mW maximum average

** This information is especially useful for clinicians performing photodynamic therapy.

Temperature:
Operating: -5 °C to 40 °C (23 °F to 104 °F)
Storage/Transportation: -40 °C to 70 °C (40 °F to 158 °F)
Time (from storage) for monitor to be ready for its intended use: 10 minutes to warm from -40 °C to -5 °C
10 minutes to cool from 70 °C to 40 °C
Device temperature will not exceed 41°C as measured during a controlled environment test.

Humidity:
Operating: 10% to 95% non-condensing
Storage/Transportation: 10% to 95% non-condensing

Operating Altitude: Up to 4,000 meters (13,123 feet)
Operating Hyperbaric Pressure: Up to 4 atmospheres
Power Requirements: Two AAA (1.5V) batteries

Battery Life (expected minimum):
NOTE: Based on testing new and fully-charged batteries. See
footnotes for brands used. Refer to battery manufacturers’
operator’s manuals for instructions for use.
Alkaline AAAa) Rechargeable AAA (700 mAh)b Rechargeable AAA (1050 mAh)c
Storage: MVI Display Mode off:
MVI Display Mode on:
9 months
25 days
Not specified Not specified
Operating without Bluetooth Connection, continuous use: 53 hours 36 hours 52 hours
Operating with Bluetooth Connection, continuous use: 44 hours 24 hours 31 hours

Dimensions (without sensor or wristband): 51 mm x 73 mm x 19 mm (H x W x D)
(2.0 in. x 2.9 in. x 0.75 in.)

Weight (with batteries and wristband): 70.0 g (2.5 oz)
Memory:
Type: Non-volatile
Capacity:
up to 1,080 hours (4 sec. data storage rate)
up to 540 hours (2 sec. data storage rate)
up to 270 hours (1 sec. data storage rate)

Classification per ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No. 60601-1:
Type of Protection: Internally powered (battery power)
Degree of Protection: Type BF-Applied Part
Mode of Operation: Continuous
Enclosure Degree of Ingress Protection: IP33

This product complies with ISO 10993-1, Biological evaluation of medical devices – Part 1: Evaluation
and testing.

a.Batteries used: Harding Alkaline AAA
b.Batteries used: Energizer (MR03) Ni-MH 700mAh Rechargable Batteries 1.2 VDC
c.Batteries used: Ansmann (HR03) Ni-MH 1050 nMh Rechargable Batteries 1.2 VDCOxygen Saturation Display Range: 0% to 100% SpO2
Pulse Rate Display Range: 18 to 321 beats per minute (BPM)
Displays:
Numeric: 3-digit LCD
Pulse Strength: Pulse Strength Bar Graph

Accuracy – Sensors: Declared accuracy data for compatible sensors can be found in Nonin’s Sensor Accuracy document.
Measurement Wavelengths and Output Power**:
Red: 660 nanometers @ 0.8 mW maximum average
Infrared: 910 nanometers @ 1.2 mW maximum average

** This information is especially useful for clinicians performing photodynamic therapy.

Temperature:
Operating: -5 °C to 40 °C (23 °F to 104 °F)
Storage/Transportation: -40 °C to 70 °C (40 °F to 158 °F)
Time (from storage) for monitor to be ready for its intended use: 10 minutes to warm from -40 °C to -5 °C
10 minutes to cool from 70 °C to 40 °C
Device temperature will not exceed 41°C as measured during a controlled environment test.

Humidity:
Operating: 10% to 95% non-condensing
Storage/Transportation: 10% to 95% non-condensing

Operating Altitude: Up to 4,000 meters (13,123 feet)
Operating Hyperbaric Pressure: Up to 4 atmospheres
Power Requirements: Two AAA (1.5V) batteries

Battery Life (expected minimum):
NOTE: Based on testing new and fully-charged batteries. See
footnotes for brands used. Refer to battery manufacturers’
operator’s manuals for instructions for use.
Alkaline AAAa) Rechargeable AAA (700 mAh)b Rechargeable AAA (1050 mAh)c
Storage: MVI Display Mode off:
MVI Display Mode on:
9 months
25 days
Not specified Not specified
Operating without Bluetooth Connection, continuous use: 53 hours 36 hours 52 hours
Operating with Bluetooth Connection, continuous use: 44 hours 24 hours 31 hours

Dimensions (without sensor or wristband): 51 mm x 73 mm x 19 mm (H x W x D)
(2.0 in. x 2.9 in. x 0.75 in.)

Weight (with batteries and wristband): 70.0 g (2.5 oz)
Memory:
Type: Non-volatile
Capacity:
up to 1,080 hours (4 sec. data storage rate)
up to 540 hours (2 sec. data storage rate)
up to 270 hours (1 sec. data storage rate)

Classification per ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No. 60601-1:
Type of Protection: Internally powered (battery power)
Degree of Protection: Type BF-Applied Part
Mode of Operation: Continuous
Enclosure Degree of Ingress Protection: IP33

This product complies with ISO 10993-1, Biological evaluation of medical devices – Part 1: Evaluation
and testing.

a.Batteries used: Harding Alkaline AAA
b.Batteries used: Energizer (MR03) Ni-MH 700mAh Rechargable Batteries 1.2 VDC
c.Batteries used: Ansmann (HR03) Ni-MH 1050 nMh Rechargable Batteries 1.2 VDC

Documentation

Resources